Support

Product Support & Setup Guides

 

For all Shinjitsu Audio speakers

Easy set up instructions


Step 1 

Place the horn on top of the black cradle

Seat the horn magnet in the rear plinth cradle

Place the horn throat on the front support 

Step 2

Attach the silver horn leads to the horn

Connect the horn leads to the top terminals

Red to Red and Black to Black

Step 3

Connect the resistor to the top posts

Push each plug firmly into the sockets

Bridge the posts with the resistor

Step 4

Adjust the horn volume with the resistor

Higher resistor values make it louder

Lower resistor values make it quieter

Step 5

Plug the rear speaker terminals into your amplifier

The top terminals are for the horn only - do NOT connect these to an amplifier

The horn will not function without the resistor

 

Download instructions and integration guides for all current products below.

  • Horn X2 – Integration Guide (PDF)
  • BSC Module – User Guide (PDF)

    • Horn X2: Crossover & Sensitivity Calculator

    Use this tool to explore how capacitor and resistor choices affect crossover point and horn sensitivity.



    Series Resistor: Fixed at 8 Ω

    Crossover Frequency: - Hz

    Resulting Attenuation: - dB

    Resulting Sensitivity: - dB

    Shinjitsu Full Speakers: Sensitivity Tuner

    Adjust parallel resistor only. Use this for complete Shinjitsu Audio speakers — not Horn X2 modules.

    Series Resistor: Fixed at 8 Ω

    Resulting Attenuation: - dB

    Resulting Sensitivity: - dB

    Based on default horn output of 109 dB before attenuation.